Yeastar TA200 Analog Telephone Adapter 2 FXS Ports

Yeastar TA200 Analog Telephone Adapter (ATA)

Yeastar TA200 Analog Telephone Adapter (ATA) provides 2 analog interface to convert existing analog equipment to IP-based networks cost-effectively. TA200 allows users to connect 2 analog phone or fax machine to enable VoIP services. Features like call waiting, call forwarding, call transfer, call conference, Direct IP Dialing, Do Not Disturb, and flexible dial plan are essential telephony features for home business and small business.

Featuring small form factor, TA200 can save space when placing on the desk. Micro USB port equipped, TA200 also can be powered by and directly connected to the USB port of PC and IP-PBX. On boot-up, TA200 supports Auto Provision FTP/TFTP/HTTP provisioning servers. It is manageable from any Web browser with intuitive Web GUI. The flexible configuration also allows basic configuration on telephone keypad with voice prompt.

Yeastar TA200 ATA Highlights

• Connects 2 analog phones and fax machines to VoIP network
• Fully compliant with SIP standard
• High-quality voice call
• Miniture design
• Rich subscribe calling features
• FTP, TFTP, HTTP Auto Provision
• Powered by USB interface
• Easy web-based configuration
  

  General

  • Ports: 2 FXS Ports
  • Telephony Interfaces: RJ11
  • Network Interfaces: 1 10/100Base-T Ethernet
  • USB: 1 Micro USB Port
  • Protocol: SIP (RFC3261)
  • Transport: UDP, TCP, TLS, SRTP
  • Codec: G.711 (alaw/ulaw), G.729A/B
  • DTMF Mode: RFC2833, SIP Info, In-band
  • Voice Capability: ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer
  • Fax: T.30 Pass-through
  • QoS: DiffServ, ToS, 802.1 P/Q VLAN tagging
  • Network: DHCP, OpenVPN, PPPoE, Static Route, VLAN
  • Network Protocol: FTP, TFTP, HTTP, HTTPS, SSH
  • Management Protocol: TR-069
  • Signaling: FXS Loop Start, FXS Kewl Start
  • Caller ID: BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID
  • Disconnect Methods: Busy Tone, Polarity Reversal
  • Power: DC 5V 1A
  • Dimensions (LxWxH): 85 x 58 x 24 mm
  • Humidity: 10-90% non-condensing
  • Storage Range: -20°C to 65°C, -4°F to 149°F
  • Operation Range:0°C to 40°C, 32°F to 104°F
  • Mounting: Desktop
  • Compatibility: Interoperable with 3CX, Asterisk, Lync Server, FreePBX and certified with Elastix and BroadSoft