No products in the cart.
Security refers to the protection of digital assets, including data, networks, devices, and systems, against unauthorized access, misuse, theft, or damage. It encompasses various measures, technologies, and practices aimed at ensuring the confidentiality, integrity, and availability of information and resources. Check out our website for more details.
Security
Showing 1–12 of 108 results
- Asenware
Asenware 2 Zone Fire Alarm Control Panel AW-CFP2166-2
- Maximum number of Analogue Conventional Detector Inputs: 20 detectors each zone
- Available Options: 2-4 Zone and 6-8 Zone
- outputs for Alarm devices: Includes 2 bells/fire relay/ fault relay
- Auxiliary resettable power output: 24VDC/ 100mA limiting protection
- Automatic power switchover: mains power and secondary power (from batteries)
- Independent functional buttons with indication: User friendly interface for easy operation and recognition
- Access levels to enter the panel
- Fault supervision and notification: inputs, outputs, system, power, earth, fuse
- Disablement: zones disablement 10.Evacuation: Fire drills to simulate fire alarm condition on panel
- Silence: sounders and buzzer silence 12.Walk test: indicators check
SKU: OF2687 - Asenware
Asenware 4 Zone Fire Alarm Control Panel AW-CFP2166-4
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input
- Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC battery will be cut off automatically until the mains power is on.
- It has an optional GSM module for fire alarm by SMS
SKU: OF2684 - Asenware
Asenware 8 Zone Fire Alarm Control Panel 2166 series
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .
- Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
- It has an optional GSM module for fire alarm by SMS .
SKU: OF2690 - Asenware
Asenware AW-CSS2166-5 Fire Strobe Sounder
Merits:
- Equipment operation stable & reliable
- Easy to install & wire
- Equipment has also issued two kinds of sound and flash an alarm signal, even people with disabilities can be a timely response to evacuate.
Demerits:
- Automatic fire alarm system can not identify the specific location of the sound & light
- Sounds kind is non debugging , only one alarm sound choices.
SKU: OF2693 - C-TEC
C-TEC CFP704-4 4 Zone Conventional Fire Alarm Panel
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Four detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
‘Class change’ and alert inputs. - Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators
SKU: OF3058 - C-TEC
C-TEC CFP708-4 8 Zone Conventional Fire Alarm Panel
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) and EN54 part 13 certified by Kiwa Telefication.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Eight detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
‘Class change’ and alert inputs. - Installer-friendly design.
SKU: OF3061 - C-TEC
C-TEC CFP702-4 Standard 2 Zone Conventional Fire Alarm Panel
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) and EN54 part 13 certified by Kiwa Telefication.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry. Manufactured by C-TEC in the UK.
- Two detector zone circuits.
- Four conventional sounder circuits*
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones. Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required. Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system) and optional CFP relay boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s ActiV fire detectors, sounders and visual alarm devices
SKU: OF3055 - C-TEC
C-TEC CFP760 CFP 8 Zone Repeater Alarm Panel
- Can be used to repeat the functions of a master CFP standard or AlarmSense 2-8 zone fire panel at remote parts of site (e.g. all potential fire service entrances).
- Up to 8 repeaters per CFP master.
- Includes its own Mains power supply that requires its own standby battery supply.
- Provides the user with access to all AL1 and AL2 functions.
- Master/Repeater communication achieved using CFP761 network driver cards (one CFP761 is supplied with the Repeater, an additional CF761 card is required at the master CFP).
- Communicates over screened two-wire fire resistant cable.
- Total repeater network cable length should not exceed 1KM.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
SKU: OF3064 - Centurion
CENTURION D10 Turbo Industrial Sliding Gate Motor
- Turbo speed for the best security and convenience
- SMART hardware and SMART connectivity provide the best experience for installers
- More space and dedicated accessory tray for complementary solutions such as GSM devices
- Intelligent theft and break-in protection with an integral vibration sensor and patented theft-deterrent cage
- Die-cast aluminium gearbox coupled with a high-torque DC motor built for speed and performance
- Uncompromising security, uninterrupted convenience with 24V battery backup
- Instant access to advanced, in-app diagnostics and logs, monitoring system health in real time
- Accurate and safe position control incorporating reliable Hall Effect technology
SKU: OF2651 - Centurion
Centurion D2 Turbo Sliding Gate Motor Kit
- Turbo speed for greater security and convenience.
- Very easy to install and set up, saving you time and money.
- Reliable battery backup.
- Dedicated Solar Mode – allows you to disable the Mains Fail buzzer when using solar power.
- Onboard multichannel CENTURION receiver.
- Multiple Modes of Operation.
- Adaptive Collision Sensing.
- Modular components clip together for easy maintenance.
- Lockable, easy Manual Override.
- Now with robust steel pinion – can be easily retro-fitted and ensures reliable operation.
SKU: OF2644
